Ink Low - Lexmark Pro4000c User Manual

Troubleshooting
Ink Cartridge Error
The printer is unable to authenticate one or more of the installed ink cartridges. Try one or more of the following:
•
Press to cancel the current job.
• Use only genuine Lexmark ink cartridges.
•
Install the specified ink cartridges properly.
•
Turn the printer off, then wait about 10 seconds, and then turn the printer back on.
Note: Make sure the printer is not in Sleep mode. Press and hold
•
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for more information.
Ink Cartridge Missing
Try one or more of the following:
•
Install the specified missing ink cartridge or cartridges.
•
Reinsert the specified ink cartridge or cartridges.
• Press or to clear the message.
OK
•
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Ink Cartridge Unsupported
Try one or more of the following:
• Replace the unrecognized ink cartridge with one that is supported by your printer.
• Use only genuine Lexmark ink cartridges.
•
Press or to clear the message.
OK
•
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.

Ink Low

You may need to replace the specified ink cartridge soon. Try one or more of the following:
•
Press or to clear the message and continue printing.
OK
Note: Depending on your printer settings, you may not be allowed to continue printing until you replace the
specified cartridge.
• See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Load [Paper Source] with [Size] Paper
Try one or more of the following:
• Load the specified paper in the tray.
•
Press to clear the message and continue printing.
OK
•
Press to cancel the current job.
for three seconds to turn off the printer.
137