Remote Control Operation - Sanyo PLC-WL2503 Owner's Manual

Sanyo - plc-wl2503 lcd projector - 720p - 16:10

Hide thumbs Also See for PLC-WL2503:

Owner's manual (136 pages)

Specifications (2 pages)

Dimensional drawing (1 page)

Table Of Contents

Table of Contents

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons

enables you to make the desired operation quickly without calling up the On-Screen Menu.

COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and

COMPONENT buttons

Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and

COMPONENT buttons on the remote control to select the

input source. See pages 27-28, 37-38 for details.

FREEZE button

Press the FREEZE button on the remote control to freeze

the picture on the screen. To cancel the Freeze function,

press the FREEZE button again or press any other button.

Fig.1 will appear on the Screen menu while the Freeze

function is working.

Fig .1

Note:

When use the MUTE button to release the Freeze function,

the mute function can not be operated at the same time.

INFO . button

Display the input source information: Input, H-sync freq .,

V-sync freq ., Screen, Language, Lamp status, Lamp

counter, Power management, Key lock, PIN code lock

and Remote control. (p.59)

D .ZOOM buttons

Press the D.ZOOM buttons on the remote control to enter to

the D. zoom +/– mode. See page 36 for details.

LAMP button

Press the LAMP button on the remote control to select the

lamp mode for changing the brightness on the screen.

Normal ...... Normal brightness.

Eco . .......... Lower brightness reduces the lamp power

consumption and extends the lamp life.

ASPECT button

Select a screen aspect from 4:3, 16:9 and 16:10. (p.50)