Remote Control - Sanyo PLC-WL2503 Owner's Manual

①
②
HDMI
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
① ON/STAND-By button
Turn the projector on or off.
(pp.18-20)
② AUTO SET button
Execute the setting of Auto setup
(includes Input search function and
Auto PC adj. function). (pp.23, 45)
③ COMPUTER 1/2 buttons
Select the COMPUTER 1 or
COMPUTER 2 input source.
(pp.27-28, 38)
Note:
To ensure safe operation, please observe
the following precautions:
– Do not bend, drop, or expose the
remote control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, spray, or
any chemical material.

Remote Control

④ VIDEO button
Select the VIDEO input source. (p.37)
⑤ S-VIDEO button
Select the S-VIDEO input source. (p.37)
㉒
⑥ Point ▲▼◄► buttons
– Select an item or adjust the value in the On-Screen Menu.
㉑
(p.21)
⑳
– Pan the image in the Digital zoom +/- mode. (p.36)
⑦ SCREEN button
Select a screen mode. (pp.26, 35-36, 43)
⑲
⑧ MENU button
Open or close the On-Screen Menu. (p.21)
⑱
⑰ ⑨ FREEZE button
⑯ Freeze the picture on the screen. (p.25)
ASPECT
⑩ NO SHOW button
⑮
Temporarily turn off the image on the screen. (p.26)
⑭
⑬
⑪ D .ZOOM ▲▼ buttons
Zoom in and out the images. (pp.25, 36)
⑫ VOLUME +/- buttons
Adjust the volume level. (p.24)
⑬ MUTE button
Mute the sound. (p.24)
⑭ IMAGE button
Select the image mode. (pp.26, 33, 40)
⑮ ASPECT button
Select a screen aspect from 4:3, 16:9 and 16:10. (pp.25,50)
⑯ LAMP button
Select a lamp mode. (pp.25, 54)
⑰ P-TIMER button
Operate the P-timer function. (pp.26, 52)
⑱ INFO . button
Operate the information function. (pp.25,59)
⑲ KEySTONE button
Correct the keystone distortion. (pp.23, 46)
⑳ SELECT button
– Execute the selected item. (p.21)
– Expand or compress the image in Digital zoom mode. (p.36)
㉑ COMPONENT button
Select the COMPONENT input source. (p.38)
㉒ HDMI button
Select the HDMI input source. (p.38)
Part Names and Functions
11