Connecting To A Computer - Sanyo PLC-WL2503 Owner's Manual

Installation
Cables used for connection
• VGA cables (Mini D-sub 15 pin) *
• Audio cables
• HDMI-DVI cable
(*One cable is supplied; other cables are not supplied with the projector.)
Note:
• Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/COMPONENT IN
terminal as input.
• When the cable is of the longer variety, it is advisable to
use the COMPUTER IN 1/COMPONENT IN and not the
COMPUTER IN 2 /MONITOR OUT.
•
Analog RGB and component signals can be output from the
COMPUTER IN 2/MONITOR OUT terminal when using the
COMPUTER IN 2/MONITOR OUT terminal as output.
14

Connecting to a Computer

Monitor Output
DVI
or
Output
Monitor Input
HDMI-DVI VGA
cable cable
COMPUTER IN 1 /
HDMI
COMPONENT IN
This terminal is
switchable. Set up
the terminal as
COMPUTER IN 2 or
MONITOR OUT.
(P. 50)
External Audio Equipment
Monitor
Audio Output Audio Input
Output
VGA Audio cable
cable (stereo)
COMPUTER IN 2 / COMPUTER/ AUDIO OUT
COMPONENT
MONITOR OUT (stereo)
AUDIO IN
Audio cable
(stereo)
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.