Sanyo PLC-WL2503 - 2500 Lumens Manual
Expand serial command functional specifications
Hide thumbs
Also See for PLC-WL2503 - 2500 Lumens:
- Owner's manual (58 pages) ,
- Manual (25 pages) ,
- Quick reference manual (1 page)
Related Manuals for Sanyo PLC-WL2503 - 2500 Lumens
Summary of Contents for Sanyo PLC-WL2503 - 2500 Lumens
- Page 1 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-WL2500 PLC-WL2501 PLC-WL2503 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division...
-
Page 2: Table Of Contents
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications - CONTENTS - Overview .........................7 Serial Interface Specification ..................7 2.1 Transfer Specification....................7 2.2 Connection.........................7 Notes for communication....................8 Name Definition ......................8 Functional Execution Command Table................9 Image Command Table...................9 PC Adjust Control Command Table ..............9 Input Control Command Table ................9 Screen Command Table ..................10 Lamp Command Table..................10... - Page 3 PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command ................19 8.4.9 CF_PROGV Command ..................19 8.4.10 CF_NZRED Command...................19 8.4.11 CF_IMAGE Command ...................20 8.4.12 CF_COLBOARD Command ................20 8.4.13 CF_IMAGEADJ Command ................20 PC Adjust Control Command ................21 8.5.1 CF_FSYNC Command ...................21 8.5.2 CF_TDOTS Command ...................21 8.5.3...
- Page 4 PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.9.2 CF_MUTE Command ..................33 8.10 Setting Command ....................34 8.10.1 CF_LANG Command ..................34 8.10.2 CF_MENUPOSITION Command ..............34 8.10.3 CF_AUTOSETUPPCADJ Command.............35 8.10.4 CF_INPUTSEARCH Command ..............35 8.10.5 CF_AUTOSETUP....................35 8.10.6 CF_BACKGND Command................35 8.10.7 CF_DISP Command ..................36 8.10.8 CF_LOGO Command..................36 8.10.9...
- Page 5 PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications Status Read Command ....................46 Format ........................46 Transfer Example ....................46 Operation Condition .....................46 Image Status Read Command ................47 9.4.1 CR_BRIGHT Command .................47 9.4.2 CR_CONT Command..................47 9.4.3 CR_COLOR Command ..................47 9.4.4 CR_TINT Command ..................47 9.4.5 CR_SHARP Command ..................47 9.4.6...
- Page 6 PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command................56 9.7.10 CR_MODELIST Command ................56 Screen Status Read Command................57 9.8.1 CR_SCREEN Command................57 9.8.2 CR_ KYSTNMODE Command...............57 9.8.3 CR_VSCALE Command ................57 9.8.4 CR_VPOS Command..................57 9.8.5 CR_HSCALE Command ................57 9.8.6 CR_HPOS Command..................58 Lamp Status Read Command ................59 9.9.1 CR_LAMPREPL Command ................59...
- Page 7 PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.20 CR_CCAPTIONDISP Command ..............66 9.11.21 CR_CCAPTIONCOLOR Command ............66 9.11.22 CR_RCODE Command ................66 9.11.23 CR_SECURITY Command .................66 9.11.24 CR_KEYDIS Command ................67 9.11.25 CR_PJLOCKNOW Command..............67 9.11.26 CR_PJLOCKMENU Command ..............67 9.11.27 CR_FANMODE Command .................67 9.11.28 CR_FANCONTROL Command ..............67 9.11.29...
-
Page 8: Overview
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications Overview 1.1 This Functional Specification defines communication functions for PLC-WL2500 / WL2501 / WL2503. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely from PC by RS-232C. Therefore, the commands are defined as Expand Serial Commands. -
Page 9: Notes For Communication
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications Notes for communication 1. Expand Serial Command is defined as one command / one line that starts with “C” and ends with carriage return (0x0D) 2. There are two types of commands: Functional Execution Command and Status Read Command. -
Page 10: Functional Execution Command Table
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table Execute command Item CF_BRIGHT_%1[CR] Set Brightness value CF_CONT_%1[CR] Set Contrast value CF_COLOR_%1[CR] Set Color value CF_TINT_%1[CR] Set Tint value CF_SHARP_%1[CR] Set Sharpness value CF_GAMMA_%1[CR] Set Gamma value CF_WBAL-R_%1[CR]... -
Page 11: Screen Command Table
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 5.4 Screen Command Table Execute command Item CF_SCREEN_%1[CR] Select Screen size CF_DZCENT_%1[CR] Cancel Digital Zoom mode CF_KEYSTONE_%1[CR] Set Keystone CF_KYSTNMODE_%1[CR] Set Keystone Store mode CF_VSCALE_%1[CR] Set value of Vertical scale CF_VPOS_%1[CR] Set value of Vertical position CF_HSCALE_%1[CR] Set value of Horizontal scale... -
Page 12: Other Command Table
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 5.8 Other Command Table Execute command Item Behave the same as corresponding key of the projector / CF_KEYEMU_%1[CR] remote control. CF_MENU_%1[CR] Switch ON/OFF of each Menu. CF_POWER_%1[CR] Switch ON/OFF of Power. CF_FREEZE _%1[CR] Set Freeze function. -
Page 13: Status Read Command Table
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command Item CR_BRIGHT[CR] Get Brightness value CR_CONT[CR] Get Contrast value CR_COLOR[CR] Get Color value CR_TINT[CR] Get Tint value CR_SHARP[CR] Get Sharpness value CR_GAMMA[CR]... -
Page 14: Screen Status Read Command Table
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 6.5 Screen Status Read Command Table Status read command Item CR_SCREEN[CR] Get selected screen size CR_KYSTNMODE[CR] Get setting status of Keystone Store mode CR_VSCALE[CR] Get setting status of Vertical Scale CR_VPOS[CR] Get setting status of Vertical Position CR_HSCALE[CR] Get setting status of Horizontal Scale... -
Page 15: Other Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications CR_FILH[CR] Get Filter used time CR_FILREPL[CR] Get the information for Filter replacement time CR_FILTIMER[CR] Get time when Filter warning OSD is displayed 6.9 Other Status Read Command Status read command Item CR_STATUS[CR] Get setting status of Projector behavior CR_SIGNAL[CR]... -
Page 16: Error Code Table
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 7. Error Code Table Error Code Details -When the received data cannot be decoded -Parameter determination error (digit number error, including invalid value, etc.) When the function selected is not available under current condition. ex) When receiving signal-related commands while no signal is entered Selected value is out of range (Not reflected) Command mismatched to Hardware (command for Optional function... -
Page 17: Functional Execution Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format PC issues commands in format as below: Pattern1 : “CF_COMMAND” [CR] Pattern2 : “CF_COMMAND_”%1 [CR] CF_ : Header COMMAND : Character line %1 : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) The projector decodes the received command and when it is ready to receive the next command, it returns the response. -
Page 18: Image Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Command "CF_BRIGHT_%1”[CR] "000~063” --------------- Directly select Brightness setting value "UP” ----------------------- Current Brightness setting value + 1 "DN” ----------------------- Current Brightness setting value – 1 Set Brightness value of user control The value set by this command will not be saved to projector. -
Page 19: Cf_Sharp Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command “CF_SHARP_%1”[CR] “000~015” ---------------- Directly select Sharpness setting value “UP” ------------------------ Current Sharpness setting value + 1 “DN” ------------------------ Current Sharpness setting value - 1 Set Sharpness value of user control The value set by this command will not be saved to projector. -
Page 20: Cf_Coltemp Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command “CF_COLTEMP_%1”[CR] “000” ------ Xlow “001” ------ Low “002” ------ Mid “003” ------ High Set Color Temperature. (Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when Details turning into Standby status or ALL is OFF, the value returns to original setting. -
Page 21: Cf_Image Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command “CF_IMAGE_%1”[CR] “DYNAMIC” ------ Dynamic (Fixed value to enable projection with a sharp, powerful picture tone) “STAND” ---------- Standard (Image adjust value is set to factory default) “REAL” ------------ Real (Fixed value to display graphic image with natural tone) “CINEMA”... -
Page 22: Pc Adjust Control Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC Command Command “CF_FSYNC_%1”[CR] “0000~0031” --------------- Directly select Fine Sync setting value “UP” -------------------------- Current Fine Sync setting value + 1 “DN” -------------------------- Current Fine Sync setting value - 1 Set Fine Sync value of PC signal The value set by this command will not be saved to projector. -
Page 23: Cf_H - Pos Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.5.4 CF_H – POS Command Command “CF_H-POS_%1”[CR] “0000~nnnn” --- Directly select Horizontal Position setting value “nnnn” shows maximum value, it is current Total Dots value - Display Dots value “UP” -------------- Current Horizontal Position setting value + 1 “DN”... -
Page 24: Cf_Dline Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command “CF_DLINE_%1”[CR] “0100”~”nnnn” --- Directly select Display Line setting value “nnnn” shows maximum value, it is current Total Line value – Vertical Position value “UP” -------------- Current Display Line setting value + 1 “DN”... -
Page 25: Input Control Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command “CF_INPUT_%1”[CR] “CONPUTER1” ----- Select Computer1 Input “COMPUTER2” ----- Select Computer2 Input “HDMI” ----------------- Select HDMI Input “VIDEO” --------------- Select Video Input “S-VIDEO” ------------ Select S-video “UP”... -
Page 26: Cf_Source Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6.2 CF_SOURCE Command Command “CF_SOURCE_%1”[CR] “ANALOG” --------- Select Analog Input “YPBPR” ----------- Select Component Input “SCART” ----------- Select Scart Input Input is ”UP” ---------------- Switch Input as follows Computer 1 Analog →YPBPR →Scart →… ”DN”... -
Page 27: Cf_Input3 Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6.5 CF_INPUT3 Command Command “CF_INPUT3_%1_”[CR] “HDMI” ------------------ Select HDMI Select HDMI Input and source specified in %1 at once. Details This command is available in normal Power ON status. Acceptable “000”[CR] Response Unacceptable “Error Code”[CR]... -
Page 28: Cf_System Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.6.9 CF_SYSTEM Command Command “CF_SYSTEM_%1”[CR] “VGA1” ------------- Select VGA1 “XGA1” ------------- Select XGA1 “WXGA3” ------------ Select WXGA3 “1080I” --------------- Select 1080I Input is “1035I” --------------- Select 1035I Computer “720P” ---------------- Select 720P ”575P”... -
Page 29: Screen Control Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command “CF_SCREEN_%1”[CR] “NORMAL” --------------------- Select Normal size “TRUE” -------------------------- Select True size “FULL” --------------------------- Select Full screen size “CUSTOM” --------------------- Select Custom size Input is “DZOOM_UP”... -
Page 30: Cf_Keystone Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command “CF_KEYSTONE_%1”[CR] “UP” ------------- Correct Keystone distortion to reduce upper part of image “FUP” ----------- Correct Keystone distortion to reduce upper part by 2steps “DN” ------------- Correct Keystone distortion to reduce lower part of image “FDN”... -
Page 31: Cf_Vpos Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7.6 CF_VPOS Command Command “CF_VPOS_%1”[CR] “015” --------- +15 “014” --------- +14 ÿ “002” --------- +2 “001” --------- +1 “000” --------- +0 “-01” ---------- -1 “-02” ---------- -2 ÿ “-14” ---------- -14 “-15”... -
Page 32: Cf_Hpos Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command “CF_HPOS_%1”[CR] “015” --------- +15 “014” --------- +14 ÿ “002” --------- +2 “001” --------- +1 “000” --------- +0 “-01” ---------- -1 “-02” ---------- -2 ÿ “-14” ---------- -14 “-15”... -
Page 33: Lamp Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command “CF_LAMPH_%1”[CR] “RST” Reset Lamp use time counter. Details This command is available in normal Power ON status. Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.8.2 CF_LAMPMODE Command Command “CF_LAMPMODE_%1”[CR]... -
Page 34: Sound Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command “CF_VOLUME_%1”[CR] “000-063” -------------------------- Directly select Volume setting value “UP” --------------------------------- Current Volume setting value +1 “DN” --------------------------------- Current Volume setting value -1 Control Volume value The same operation of Volume Up/Down as projector and RC, and directly select Volume setting value. -
Page 35: Setting Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command “CF_LANG_%1”[CR] “ENG” --------------------------- Select English “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP” ---------------------------- Select Spanish “POR” --------------------------- Select Portuguese “NED”... -
Page 36: Cf_Autosetuppcadj Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.3 CF_AUTOSETUPPCADJ Command Command “CF_AUTOSETUPPCADJ_%1”[CR] “ON” ------------------- Set Auto PC ADJ. function to ON “OFF” ------------------ Set Auto PC ADJ. function to OFF Set/Cancel Auto PC adj. function This command is available in normal Power ON status. Details Note) It is unable to set both PC ADJ. -
Page 37: Cf_Disp Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.7 CF_DISP Command Command “CF_DISP_%1”[CR] “ON” ----------------------------- Select Display “OFF” --------------------------- Cancel Display “CNTDWNOFF” -------------- Count down OFF “UP” --------------- Switch Display mode forward (On → Countdown OFF → Off → On →…) “DN”... -
Page 38: Cf_Ceil Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.9 CF_CEIL Command Command “CF_CEIL_%1”[CR] “ON” ------------------------ Set Ceiling to ON “OFF” ----------------------- Set Ceiling to OFF Set/Cancel Ceiling setting. The value set by this command is stored in EEPROM and its setting is effective Details even after ALL is OFF This command is available in normal Power ON status. -
Page 39: Cf_Hdmi Sound Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.13 CF_HDMI SOUND Command Command “CF_HDMI SOUND_%1”[CR] “HDMI” ----------------------- Select PCM sound (Digital sound) “EXTERNAL” ------------- Select External sound input Select sound mode of HDMI setup. The status set by this command is stored in EEPROM and its setting is effective Details after ALL is OFF This command is available in normal Power ON status. -
Page 40: Cf_P-Manetime Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.17 CF_P-MANETIME Command Command “CF_P-MANETIME_%1”[CR] “01” ~ ”30” ----------------------- Directly select setting time by the minute “UP” ------------------------------- Plus one minute (01 → 02 → ÿ e ÿ e ÿ e → 30 → 01) ÿ... -
Page 41: Cf_Ptime Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.21 CF_PTIME Command Command “CF_PTIME_%1”[CR] “001” ~ “180” -----------Directly specify the time by minutes. Set Countdown timer for P-timer function. The status set by this command is stored in EEPROM and its setting is effective Details after ALL is OFF This command is available in normal Power ON status. -
Page 42: Cf_Rcode Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.24 CF_RCODE Command Command “CF_RCODE_%1”[CR] "001” --------------------------- Select Code1 "002” --------------------------- Select Code2 “UP” --------------- Switch Code setting of Remote Control forward “DN” -------------- Switch Code setting of Remote Control backward Note) “UP”... -
Page 43: Cf_Fanmode Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.27 CF_FANMODE Command Command “CF_FANMODE_%1”[CR] “L1” ---------------------------- Set Fan Mode to L1 “L2” ---------------------------- Set Fan Mode to L2 Switch Fan Mode When L1 is selected, fan noise after POWER OFF is louder. When L2 is selected, fan noise after POWER OFF becomes quiet. -
Page 44: Cf_Filh Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.10.31 CF_FILH Command Command “CF_FILH_%1”[CR] “RST” ---------------Reset Filter used time Details Reset filter used time Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.10.32 CF_FDEFAULT Command Command “CF_FDEFAULT_%1”[CR] “RST” Set the value to Factory Default Details This command is available in normal Power ON status. -
Page 45: Other Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command “CF_KEYENU_%1”[CR] “RIGHT” ------------------------- Shift Pointer on OSD Menu to right “LEFT” --------------------------- Shift Pointer on OSD Menu to left “UP” ------------------------------ Shift Pointer on OSD Menu to right “DN”... -
Page 46: Cf_Freeze Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Command Command “CF_FREEZE_%1”[CR] “ON” ------------------------ Set Freeze to ON “OFF” ----------------------- Set Freeze to OFF “UP” ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e ) “DN”... -
Page 47: Format
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format PC issues commands in format as below: “CR_Command” [CR] Command: Character Line When projector receives the appropriate command, it returns a character line as the required data “000ÿ... -
Page 48: Image Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command “CR_BRIGHT”[CR] Details Get Brightness value of user control Acceptable “000_ÿ ÿ A ”[CR] Response “000”~“063” Unacceptable “Error code”[CR] 9.4.2 CR_CONT Command Command “CR_CONT”[CR] Details Get Contrast value of user control... -
Page 49: Cr_Wbal – R Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.4.7 CR_WBAL – R Command Command "CR_WBAL-R”[CR] Details Get White Balance Red value of user control Acceptable “000_%a”[CR] Response “000”~“063” Unacceptable “Error code”[CR] 9.4.8 CR_WBAL – G Command Command "CR_WBAL-G”[CR] Details Get White Balance Green value of user control Acceptable “000_%a”[CR]... -
Page 50: Cr_Progv Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.4.12 CR_PROGV Command Command “CR_PROGV”[CR] Details Get setting status of Progressive scan Acceptable “000_%a”[CR] “L1” ----------------- Progressive Mode L1 is selected “L2” ----------------- Progressive Mode L2 is selected Response “FILM” -------------- Progressive Model FILM is selected “OFF”... -
Page 51: Pc Adjust Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC”[CR] Details Get Fine Sync value Acceptable “000_%a”[CR] Response “0000”~“0031” Unacceptable “Error Code”[CR] 9.5.2 CR_TDOTS Command Command “CR_TDOTS”[CR] Details Get Total Dots value Acceptable “000_%a”[CR] “nnnn”~“mmmm”... -
Page 52: Cr_Ddots Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.5.6 CR_DDOTS Command Command “CR_DDOTS”[CR] Details Get Display Dots value Acceptable “000_%a”[CR] “0256”~“nnnn” Response (nnnn = Total Dots – Horizontal Position value) Unacceptable “Error Code”[CR] 9.5.7 CR_DLINE Command Command “CR_DLINE”[CR] Details Get Display Line value Acceptable “000_%a”[CR]... -
Page 53: Video Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command “CR_SERSYS”[CR] Get currently selected signal Details Returns auto-detected signal in Auto mode Only available for Video input. (N/A when Input is computer) Acceptable “000_%a”[CR] “1080I60”... -
Page 54: Input Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command “CR_INPUT”[CR] Details Get selected INPUT No. Acceptable “000_%1”[CR] Response Request data “1”-”5” Unacceptable “Error code”[CR] 9.7.2 CR_SOURCE Command Command “CR_SOURCE”[CR] Details Get selected Source Acceptable “000_%1”[CR] “ANALOG”... -
Page 55: Cr_Srcinp4 Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP4 Command Command "CR_SRCINP4” [CR] Details Get selected source of Input 4_Video Acceptable “000_%1”[CR] Response Request data “VIDEO” ------------- Composite Video Input is selected Unacceptable “Error code”[CR] 9.7.7 CR_SRCINP5 Command Command "CR_SRCINP5”... -
Page 56: Cr_System Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.8 CR_SYSTEM Command Command “CR_SYSTEM”[CR] Details Get selected System Acceptable “000_%1”[CR] “VGA1” -------------- VGA1 is selected “VGA2” -------------- VGA2 is selected ÿ “XGA1”-------------- XGA1 is selected ÿ “WXGA3” --------- WXGA3 is selected “1080i”... -
Page 57: Cr_Syslist Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command Command “CR_SYSLIST”[CR] Details Get selectable System titles Acceptable “000_%1_%2_..._%x” [CR] - When Input is PC-Analog “XGA1” ------------ XGA1is selectable “1080I ” ----------- 1080i is selectable Projector does not return Auto, Mode 1-10 When there is no signal, it returns Error Code “101”... -
Page 58: Screen Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command Command “CR_SCREEN”[CR] Details Get selected on-screen image size Acceptable “000_%a”[CR] “NORMAL” --------------- Normal mode is selected “TRUE” -------------------- True mode is selected Input “FULL”... -
Page 59: Cr_Hpos Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.8.6 CR_HPOS Command Command “CR_HPOS”[CR] Details Get setting status of Horizontal Position Store Mode Acceptable “000_%1”[CR] Response “-15” ~ “015” Unacceptable “Error code”[CR] 58/72... -
Page 60: Lamp Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command “CR_LAMPREPL”[CR] Details Get information of Lamp Replacement time Acceptable “000_%1”[CR] “1Y” -------------------------- Over lamp replacement time “1N” -------------------------- Within lamp replacement time “1”... -
Page 61: Cr_Lampmsts Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command “CR_LAMPSTS”[CR] Details Get Lighting status of lamp Acceptable “000_%1”[CR] “ÿ N **** ” A number of * should be among 1-4. First character shows how many lamps are incorporated in projector. -
Page 62: Cr_Volume Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command “CR_VOLUME”[CR] Details Get Volume value of user control Acceptable “000_%a”[CR] Response “000”~“063” Unacceptable “Error code”[CR] 9.10.2 CR_MUTE Command Command “CR_MUTE”[CR] Details Get sound mute setting status Acceptable “000_%a”[CR] “ON”... -
Page 63: Setting Status Read Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command “CR_LANG”[CR] Details Get selected language Acceptable “000_%a”[CR] “ENG” --------------------------- Select English “DEU” --------------------------- Select German “FRA” --------------------------- Select French “ITA” ----------------------------- Select Italian “ESP”... -
Page 64: Cr_Backgnd Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.4 CR_BACKGND Command Command “CR_BACKGND” [CR] Details Get setting status of Screen for no signal Acceptable “000_%1” [CR] “BLUE” -------------------------------- Blue Back is selected Response “USER” ------------------------------- User is selected “BLACK” ------------------------------ Black Back is selected Unacceptable “Error Code”... -
Page 65: Cr_Screenaspect Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.9 CR_SCREENASPECT Command Command “CR_SCREENASPECT”[CR] Details Get status of Screen aspect Acceptable “000_%1”[CR] “43MODE” ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e Select 4ÿ 3 mode Response “169MODE”... -
Page 66: Cr_P-Mane Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.14 CR_P-MANE Command Command “CR_P-MANE”[CR] Details Get Power management setting status Acceptable “000_%a”[CR] “OFF” -------------------------- Power Management is OFF Response “READY” ---------------------- Power Management is Ready “SHUTDOWN” ---- Power Management is set to Shut Down mode Unacceptable “Error code”[CR] 9.11.15 CR_P-MANETIME Command... -
Page 67: Cr_Ptime Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.19 CR_PTIME Command Command “CR_PTIME”[CR] Details Get setting status of Countdown timer. Acceptable “000_%a”[CR] Response “001”~“180” ------------1~180 minutes Unacceptable “Error code”[CR] 9.11.20 CR_CCAPTIONDISP Command Command “CR_CCAPTIONDISP”[CR] Details Get selected channel of Closed caption Acceptable “000_%a”[CR] “OFF”... -
Page 68: Cr_Keydis Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.24 CR_KEYDIS Command Command “CR_KEYDIS”(CR) This command is available to models with top panel buttons only. Details Get disability status of RC/Projector keys (valid or invalid) Acceptable “000_%a”[CR] “NONE” -------------------------- RC / Projector keys are valid Response “RC”... -
Page 69: Cr_Delayctrl Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.11.29 CR_DELAYCTRL Command Command “CR_DELAYCTRL”[CR] Details Get setting status of Video delay control Acceptable “000_%1”[CR] “ON” ----------------------- Video delay control is active Response “OFF” ---------------------- Video delay control is inactive Unacceptable “Error Code”[CR] 9.11.30 CR_FILH Command Command... -
Page 70: Cr_Status Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command “CR_STATUS”(CR) Get status of Projector behavior. Details This command affects the same as ”CR0” of Basic Serial command, but this has an error code. Acceptable “000_%1”[CR] “00”= Power ON... -
Page 71: Cr_Tempwarn Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12.5 CR_TEMPWARN Command Command “CR_TEMPWARN”[CR] Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature Details If there are several sensors installed, it is possible to get information from all the sensors at once. -
Page 72: Cr_Temp Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12.6 CR_TEMP Command Command "CR_TEMP”[CR] Get current temperature inside a projector. Details If there are several sensors installed, it is possible to get information from all the sensors at once. Acceptable “000_%1_%2_%3”[CR] %1= Sensor 1 temperature (Outside temperature) %2= Sensor 2 temperature (Inside temperature1) -
Page 73: Cr_Tempfail Command
PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications 9.12.7 CR_TEMPFAIL Command Command "CR_TEMPFAIL”[CR] Get the temperature inside a projector when abnormal temperature occurs. Details If there are several sensors installed, it is possible to get information from all the sensors at once.