Image Adjustment - Sanyo PLC-WL2503 Owner's Manual

1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select the Image
adjust and then press the Point ► or the SELECT
button.
2
Use the Point ▲▼ buttons select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point button to decrease the contrast; press the
◄
Point button to increase the contrast (from 0 to 63).
►
Brightness
Press the Point button to decrease the brightness; press
◄
the Point button to increase the brightness (from 0 to 63).
►
Color
Press the Point button decrease the intensity of the color;
◄
press the Point button increase the intensity of the color
►
(from 0 to 63).
Tint
Press the Point buttons to adjust the tint value to get a
◄►
proper color balance (from 0 to 63).
Color temp .
Use the Point buttons to select the desired Color temp.
◄►
level (Xlow, Low, Mid, or High).
White balance (Red)
Press the Point button to lighten red tone; press the Point
◄
button to deepen red tone (from 0 to 63).
►
White balance (Green)
Press the Point button to lighten green tone; press the
◄
Point button to deepen green tone (from 0 to 63).
►
White balance (Blue)
Press the Point button to lighten blue tone; press the
◄
Point button to deepen blue tone (from 0 to 63).
►
Note:
• When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to User.
• Tint can not be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.39).
• When Blackboard (Green) or Colorboard is selected in Image select Menu, Color temp . will change to
Blackboard or Colorboard.

Image Adjustment

Image adjust Menu
buttons to
◄►
Video Input
Selected Image mode
Use the Point
◄►
buttons to adjust the
setting value.
41