Computer Input
Custom adj .
Adjust the screen scale and position manually with this
function.
Press the Point ► button at Custom adj . and the Custom
adjustment menu is displayed on the screen, you can use
the Point ▲▼ buttons to choose the item you want to
adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V . .................. When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H, then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale or position, press the
SELECT button at "Yes". When Custom
is selected, the saved scale or position is
used.
Reset . ................ Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at "Yes".
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears
and D . zoom + appears. Press the SELECT button to
expand the image size. Use the Point
the image. The Panning function can work only when the
image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
or the SELECT button on the remote control.
▲
Digital zoom -
Select Digital zoom -. The On-Screen Menu disappears
and D . zoom - appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM
or the SELECT button on the remote control.
▼
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
and the SELECT buttons.
▲▼
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
27-28) again, or adjust the screen size with the D.ZOOM
buttons.
▲▼
36
buttons to pan
▲▼◄►
Custom adj . Menu
Note:
• When no signal is detected, Normal is set
automatically and Custom adj . can not be
selected and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input
signal.
HDMI
Remote Control
ASPECT
Note:
• The panning function may not operate
properly if the stored Mode in the PC adjust
Menu is used (p.32).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when
Custom is selected for the screen size.
• True, Full, and Digital zoom +/– can not be
selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p.29).
• Digital zoom +/- can not be selected when
Full or True or 4:3 or 16:9 is selected in the
Screen aspect. (p.50)
POINT▲▼◄►
buttons
SELECT button
D .ZOOM ▲ button
D .ZOOM ▼ button