Remote Control Operation - Sanyo PLC-XU105 Owner's Manual

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO button
Press the COMPUTER or VIDEO button on the remote
control to select the input source. See pages 27, 36-37 for
details.
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
AUTO PC button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 29 for
details.
D .ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter to
the Digital zoom +/– mode. See page 35 for details.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control
to select the lamp mode for changing the brightness on the
screen.
Auto ........... The brightness according to the input signal
(between High and Eco mode).
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
Remote Control
AUTO PC
button
D .ZOOM
buttons

Note:
• See the next page for the description of other
buttons.
Basic Operation
COMPUTER /VIDEO
button
P O I N T ▲ ▼
buttons
FREEZE button
LAMP CONTROL
button
5