Remote Control - Sanyo PJLink PLC-WXU30K Owner's Manual

Remote Control

q
t e
r
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!7
To ensure safe operation, please
observe the following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, splay, or any
chemical material.
q L-CLICK button
Act as the left mouse button for wireless mouse operation. (p.15)
w POWER ON/STAND-By button
Turn the projector on or off. (pp.22-23)
e WIRED REMOTE jack
Connect the remote control cable(not supplied) to this jack when using as a wired
remote control.Wireless remote control does not work when the remote control
cable is connected to the projector
SIGNAL EMISSION indicator
r
Lights red while the laser beam is being emitted from the laser light window or a
signal is being sent from the remote control to the projector.
LASER LIGHT window
t
A laser beam is emitted from here (p.14).
VIDEO button
y
Select the VIDEO input source. (p.40)
w
COMPUTER button
u
Select the COMPUTER input source. (pp.30-31,41)
AUTO PC button
i
Automatically adjust the computer image to its optimum setting. (pp.28,33,47)
K EySTONE button
o
Correct keystone distortion. (pp.26, 48)
Point ed 7 8 ( VOLUME + / – ) buttons
!0
@6 – Select an item or adjust the value in the On-Screen Menu. (p.24)
– Pan the image in the Digital zoom + mode. (p.39)
– Adjust the volume level. (Point 7 8 buttons) (p.27)
@5
MENU button
!1
Open or close the On-Screen Menu. (p.24)
FREEZE button
!2
Freeze the picture on the screen. (p.28)
L ASER button
!3
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. (p.14)
@4
– Display the Pointer on the screen. (p.14)
PAGE ed buttons
!4
Scroll back and forth the pages on the screen when giving a presentation. To use
@3
these buttons, connect the projector and your computer with a USB cable. (pp.11,
19)
LAMP CONTROL button
!5
@2
Select a lamp mode. (pp.28, 53)
D .ZOOM ed buttons
!6
@1
Zoom in and out the images. (pp.28, 39)
RESET/ON/ALL-OFF switch
!7
@0 When using the remote control, set this switch to "ON." Set it to "ALL OFF" for
power saving when it is not used. Slide this switch to "RESET" to initialize the
remote control code or switch Spotlight and Pointer to the Laser pointer function.
!9
(pp.14-15)
IMAGE button
!8
!8
Select the image mode. (pp.29,36,43)
MUTE button
!9
Mute the sound. (p.27)
P-TIMER button
@0
Operate the P-timer function. (p.29)
NO SHOW button
@1
Temporarily turn off the image on the screen. (p.29)
R-CLICK button
@2
Act as the right mouse button for wireless mouse operation. (p.15)
@3 SELECT button
– Execute the selected item. (p.24)
– Expand or compress the image in Digital zoom mode. (p.39)
PRESENTATION POINTER button
@4
Move a pointer of the projector or a pointer for wireless mouse operation. (pp.14-15)
AUTO SET/CANCEL button
@5
– Correct vertical keystone distortion and adjust the PC display parameters. (pp.26,
47)
– Display the image in SD card or return to the menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up and Operation" and owner's
manual of Memory viewer.
NETWORK button
@6
Select the Network input or Memory viewer input. See owner's manual "Network
Set-up and Operation" and owner's manual of Memory viewer .
Part Names and Functions
13