Front Bezel Security - HP Z200 - Small Form Factor Workstation Maintenance And Service Manual

Front bezel security

You can lock the front bezel in place by installing a security screw provided by HP. To install the security
screw:
1. Prepare the computer for servicing by following the
CAUTION:
data loss.
2. Remove the access panel (see
3. Remove the front bezel (see
4. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure 5-5
5. Replace the front bezel.
ENWW
Failure to follow the predisassembly procedures can result in equipment damage or
Removing the access panel on page
Removing the access panel on page
Retrieving the Front Bezel Security Screw
Predisassembly procedures on page
71).
71).
Removing and installing components
68.
73