Memory; Supported Dimm Configurations; Dimm Installation Guidelines; Dimm Installation Order - HP Z200 - Small Form Factor Workstation Maintenance And Service Manual

Memory

This section presents memory module (DIMM) configuration information and removal/installation
procedures.

Supported DIMM configurations

The computer supports these DIMM configurations:
●
Four DIMM slots
●
Memory configuration from 1 GB to 16GB
●
No support for mirroring
● No support for DIMM sparing
●
Error checking and correcting (ECC) and non-ECC DIMMs are supported.

DIMM installation guidelines

●
Install only HP-approved DDR3 DIMMs
CAUTION:
computer. Because third-party DIMMs might not be electrically or thermally compatible, they are
not supported by HP.
●
For ECC DIMMs, use only industry-standard ECC unbuffered DIMMs. See
quickspecs

DIMM installation order

The numbers in the following figure show the correct installation order for DIMMs.
Figure 5-44
ENWW
HP ships only DIMMs that are electrically and thermally compatible with this
to find which DIMMs are compatible with the computer.
DIMM load order
http://www.hp.com/go/
Removing and installing components 105