Installing The Pci Retainer - HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual

2. For short or tall cards, lift the PCI retainer arm (1) with one hand, press in on the sides (2) of the
retainer, and rotate it (3) out of the chassis.
Figure 4-20

Installing the PCI retainer

1. Disconnect power from the system (
access panel
facing up.
2. For short or tall PCI cards, attach the hooks of the PCI retainer (1) under the slots on the rear of
the chassis, and then rotate the retainer down until the retainer arm (2) supports the card.
Figure 4-21
ENWW
Removing the short or tall card PCI retainer
(Access panel on page
Installing the short or tall card PCI retainer
Pre-disassembly procedures on page
57). Place the workstation on its side with the system board
Removing and replacing components
50), and remove the
69