2.
Remove the screw attaching the lock to the chassis.
Figure 4-6
Access panel
Before accessing the internal components of the workstation, the access panel must be removed.
To remove the access panel:
WARNING!
off and that the power cord is disconnected from the electrical outlet.
1.
Disconnect power from the system.
2.
If a lock is present, unlock the access panel. The keys are on the rear panel
components on page
3.
Pull up on the handle and lift off the cover.
Figure 4-7
ENWW
Remove fastening screw
Before removing the workstation access panel, ensure that the workstation is powered
4). Also, unlock any other locks that are present (Kensington, or Padlock).
Opening the access panel
(Rear panel
Removing and replacing components
57