HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual page 107

2. Raise the processor socket handle (1) fully (the full swing angle of the lever is approximately 105
degrees). Lift the processor socket cover (2).
Figure 4-66
3. Lift the processor straight out of the socket.
Figure 4-67
CAUTION:
installing it.
NOTE: Store the processor in a safe place where it will not be damaged.
ENWW
Raising the processor socket handle
Lifting the processor from the socket
To avoid bending the socket pins, keep the processor perfectly flat when removing or
Removing and replacing components 97