Removing The Security Lock (Optional) - HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual

Removing the security lock (optional)

If a security padlock is installed, remove it before servicing the unit. To remove the padlock, unlock it
and slide it out of the padlock loop as shown in the following image.
Figure 4-3
ENWW
CPU heatsink
heatsink on page
PCI retainer
Removing the security lock
(Removing the CPU
93)
Processor (Removing the
processor on page 96)
(PCI retainer on page 68)
PCI retention clamp (PCI
retention clamp
on page 70)
PCI or PCI Express card
PCI or PCI Express cards
on page 71)
(Removing
CPU heatsink
(Removing the CPU
heatsink on page 93)
Processor (Removing the
processor on page
System board
board on page
Removing and replacing components
96)
(System
98)
55