Cut Sheet Paper Jams
WARNING: Do not carry out any operations
inside the printer with the Power Switch
set to ON.
Make sure the printer is turned OFF.
1.
Open the access cover.
.
Set the Paper Thickness Lever to position 10.
.
CAUTION!
The printhead may be HOT!
Remove the ribbon cartridge. See "Replacing the
.
Ribbon Cartridge."
Move the printhead away from the paper.
.
Rotate the platen knob in the relevant direction
.
and pull the cut sheet out from the top of the
printer.
If a paper fragment remains inside the printer:
.
(a) use tweezers to grip and extract it or
(b) insert a triple folded sheet from the Paper
Tray and turn the platen knob to pass the folded
sheet through and push out the paper fragment.
ML620/ML621 User's Guide