Oki ML620 User Manual page 66

MENU SETTINGS TABLE
Group Item
CSF (Cut Line Spacing
Sheet
Feeder) Bin
Page Width
1
(Appears
displayed for ML621)
only when the
Page Length
optional Cut
Sheet Feeder is
installed.)
Cut Sheet Auto Eject
Position
TOF Adjust
Function
Change to 8 lines per inch (lpi) to
get more lines on a page.
4
(only Change to 13.6" to print on wide
paper.
Selects the length of the paper
you are using. This enables the
printer to keep track of the initial
printing position (TOF) on each
page.
When the printer reaches the
selected measurement, measured
from the bottom of the page, it
ejects the paper.
Set an adjustment value for the
reference position in regard to the
TOF position of a cut sheet paper.
The position moves to the bottom
edge of the page (+) and to the
top edge of the page (–) in 1/144"
increments.
Settings (defaults are set in bold italic)
6 LPI, 8 LPI
8", 13.6"
3" (76.2 mm), 3.25" (82.6 mm),
3.33" (84.7 mm), 3.5" (88.9 mm),
3.66" (993.1 mm), 4" (101.6 mm),
5" (127 mm), 5.5" (139.7 mm), 6"
(152.4 mm), 7" (177.8 mm), 8"
(203.2 mm), 8.5" (215.9 mm), 11"
(279.4 mm), 11.7" (296.3 mm),
12" (304.8 mm), 14" (355.6 mm),
16" (420.9 mm), 17" (431.8 mm)
.25" (6.35 mm), .5" (12.7 mm), .58"
(14.82 mm), Invalid
–20 ~ –1, 0, +1 ~ +20
ML620/ML621 User's Guide