Oki ML620 User Manual page 59

MENU SETTINGS TABLE
Group Item
Set-Up Operator Panel Function
(cont.)
Reset Inhibit
Print Suppress Effective
Auto LF
Auto CR
for IBM Emulation)
Print DEL Code
(only displayed for ML
Emulation)
Function
3
Set control panel operation.
Limited operation locks functions
on the control panel; only SEL,
LOAD/EJECT, and TEAR keys work.
To prevent a reset signal from
the computer from resetting the
printer to its defaults, set to Yes.
Set whether to enable or disable a
print suppress setup command.
Set whether to perform automatic
line feed operation or not upon
receiving a CR code. If your
printout is consistently double-
spaced, select No; if it overprints,
select Yes.
8
If you want the printer to
(only displayed
automatically add a carriage
return when a Line Feed is
received at the end of a line,
change the setting to "Yes."
7
To print the DEL code (decimal 27)
as a solid box, set to Yes.
Settings (defaults are set in bold italic)
Full Operation, Limited Operation
No, Yes
No, Yes
No, Yes
No, Yes
No, Yes
ML620/ML621 User's Guide