Oki ML620 User Manual page 47

MENU SETTINGS TABLE
Group Item
Rear Feed Page Length
(Push)
(cont.)
Initial Position
Cut Position Adjust
TOF Adjust
Function
Specify the length of a continuous
form.
Paper position (print or cut) when
printer is powered on.
Specify an adjustment value
for where to cut the end of a
continuous form.
Specify an adjustment value for
the reference position for the Top
of Form position of a continuous
form.
The position moves to the bottom
edge of the page (+) and to the
top edge of the page (–) in 1/144"
increments.
Settings (defaults are set in bold italic)
3" (76.2 mm), 3.25" (82.6 mm),
3.33" (84.7 mm), 3.5" (88.9 mm),
3.66" (993.1 mm), 4" (101.6 mm),
5" (127 mm), 5.5" (139.7 mm), 6"
(152.4 mm), 7" (177.8 mm), 8"
(203.2 mm), 8.5" (215.9 mm), 11"
(279.4 mm), 11.7" (296.3 mm),
12" (304.8 mm), 14" (355.6 mm),
17" (431.8 mm)
Print position, Cut position
–20 ~ –1, 0, +1 ~ +20
–20 ~ –1, 0, +1 ~ +20
ML620/ML621 User's Guide