MENU SETTINGS TABLE
Group
Item
Pull
Page Length
(cont.)
LF Revise (Continuous
Paper Line Feed Adjust)
Centering Position
Cut Sheet
Line Spacing
Top Feed
Form Tear-Off
(Displayed when
connected to RPS)
Function
Specify the length of a continuous
form.
For continuous feed, adjusts the
line feed to the specified amount.
Used to limit printhead travel
when printing narrow columns.
Select Mode 1 for ML620. Select
Mode 1 or Mode 2 for the ML621.
Change to 8 lines per inch (lpi) to
get more lines on a page.
5, 6
Specify manual form paper
advancement or select a time;
when printer is idle for .5, 1 or
2 seconds, paper is advanced
from the current print position to
the tear position. When data is
received, paper is moved to its
original printing position.
Settings (defaults are set in bold italic)
3" (76.2 mm), 3.25" (82.6 mm),
3.33" (84.7 mm), 3.5" (88.9 mm),
3.66" (993.1 mm), 4" (101.6 mm),
5" (127 mm), 5.5" (139.7 mm), 6"
(152.4 mm), 7" (177.8 mm), 8"
(203.2 mm), 8.5" (215.9 mm), 11"
(279.4 mm), 11.7" (296.3 mm),
12" (304.8 mm), 14" (355.6 mm),
17" (431.8 mm)
–2, –1, 0, +1, +2
Default, Mode1, Mode2
6 LPI, 8 LPI
Manual, 0.5 sec, 1 sec, 2 sec
ML620/ML621 User's Guide