Call Feature Settings - Linksys SPA921-NA Administrator's Manual

Ext 1/2/3/4/5/6 Tab
Referee Bye Delay
Refer-To Target Contact
Sticky 183
Auth INVITE

Call Feature Settings

Field
Blind Attn-Xfer Enable
MOH Server
Message Waiting
Auth Page
Default Ring
Auth Page Realm
Linksys 900 Series IP Phone Administrator Guide
5-42
For the Referee Bye Delay, enter the appropriate period of time in seconds.
The default is 0.
To contact the refer-to target, select yes. Otherwise, select no.
The default is no.
If this feature is enabled, the IP telephony ignores further 180 SIP responses after
receiving the first 183 SIP response for an outbound INVITE. To enable this
feature, select yes. Otherwise, select no.
The default is no.
When enabled, authorization is required for initial incoming INVITE requests
from the SIP proxy.
Description
Enables the 900 Series phone to perform an attended transfer operation by ending
the current call leg and performing a blind transfer of the other call leg. If this
feature is disabled, the 900 Series phone performs an attended transfer operation
by referring the other call leg to the current call leg while maintaining both call
legs. To use this feature, select yes. Otherwise, select no.
The default is no.
User ID or URL of the auto-answering streaming audio server. When only a user
ID is specified, the current or outbound proxy is contacted. Music-on-hold is
disabled if the MOH Server is not specified.
Indicates whether the Message Waiting Indicator on the phone is lit. This
parameter is toggled by a message from the SIP proxy to indicate if a message is
waiting.
The default is No.
Specifies whether to authenticate the invite before auto answering a page. The
Auto Answer Page parameter, on the Supplementary Services section of the User
tab, is set to Yes by default.
The default is No.
Type of ring heard. This corresponds to the Ring Tone on the Phone tab.
Identifies the Realm part of the Auth that is accepted when the Auth Page
parameter is set to Yes.
This parameter accepts alphanumeric characters.
Chapter 5 SPA900 Series Phone Field Reference
Document Version 3.0