Linksys SPA921-NA Administrator's Manual page 48

Using the Interactive Voice Response Interface
For example, to input password test#@1234 by phone keypad, you need to press the following
sequence of digits: 8378001234.
1.
After entering a value, press the # (pound) key to indicate end of input.
–
–
–
–
Notes:
–
–
2.
After one minute of inactivity, the unit times out. The user needs to re-enter the configuration menu
from the beginning by pressing * * * *.
Linksys 900 Series IP Phone Administrator Guide
2-20
To save value, press 1.
To review the value, press 2.
To re-enter the value, press 3.
To cancel the value entry and return to the main configuration menu, press
The final # key is not included in the password value.
Saved settings take effect when the telephone is hung up, and if necessary, the 900 Series phone
automatically reboots.
Chapter 2 Getting Started
*
' (star).
Document Version 3.0