Miscellaneous Line Key Settings; Line Key Led Pattern - Linksys SPA921-NA Administrator's Manual

Phone Tab

Miscellaneous Line Key Settings

Field
SCA Line ID Mapping

Line Key LED Pattern

Field
Idle LED
Remote Undefined LED
Local Seized LED
Remote Seized LED
Local Progressing LED
Remote Progressing LED
Local Ringing LED
Linksys 900 Series IP Phone Administrator Guide
5-34
Description
Specifies the shared call appearance line ID mapping. Choose Vertical First or
Horizontal First. Each LED can hold two calls and the first call on an LED makes
it light up. Horizontal first means the second call makes the same LED flash.
Vertical first means the second call lights up the next LED.
For example, if Extension 101 is assigned to two LEDs, and Vertical First is
selected, the second call on Extension 101 lights up the second LED. The third
call makes the first LED flash, and the fourth call makes the second LED flash.
If Horizontal First is selected, the second call on Extension 101 makes the first
LED flash. The third call lights up the second LED, and the fourth call makes the
second LED flash.
Description
LED pattern during the Idle state, where the call appearance is not is in use and
is available to make a new call. Leaving this entry blank indicates the default
value of c=g.
LED pattern during the Remote Undefined state, where the shared call state is
undefined (the station is still waiting for the state information from the
application server). Not applicable if the call appearance is not shared. Leaving
this entry blank indicates the default value of c=r;p=d.
LED pattern during the Local Seized state, where this station has seized the call
appearance to prepare for a new outbound call. Leaving this entry blank indicates
the default value of c=r.
LED pattern during the Remote Seized state, where the shared call appearance is
seized by another station. Not application if the call appearance is not shared.
Leaving this entry blank indicates the default value of c=r;p=d.
LED pattern during the Local Progressing state, where this station is attempting
on this call appearance an outgoing call that is in proceeding (i.e. the called
number is ringing). Leaving this entry blank indicates the default value of c=r.
LED pattern during the Remote Progressing state, where another station is
attempting on this shared call appearance an outbound call that is progressing.
Not applicable if the call appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
LED pattern during the Local Ringing state, when the call appearance is ringing.
Leaving this entry blank indicates the default value of c=r;p=f.
Chapter 5 SPA900 Series Phone Field Reference
Document Version 3.0