Linksys SPA921-NA Administrator's Manual page 130

Regional Tab
Caller ID Method
Caller ID FSK Standard
Feature Invocation Method
Linksys 900 Series IP Phone Administrator Guide
5-32
The following choices are available:
•
Bellcore (N.Amer,China)—CID, CIDCW, and VMWI. FSK sent after first ring (same
as ETSI FSK sent after first ring) (
•
DTMF (Finland, Sweden)—CID only. DTMF sent after polarity reversal (and
DTAS) and before first ring.
•
DTMF (Denmark)—CID only. DTMF sent after polarity reversal (and
before first ring.
•
ETSI DTMF—CID only. DTMF sent after DTAS (and
before first ring.
•
ETSI DTMF With PR—CID only. DTMF sent after polarity reversal and DTAS and
before first ring.
•
ETSI DTMF After Ring—CID only. DTMF sent after first ring (
or DTAS).
•
ETSI FSK—CID, CIDCW, and VMWI. FSK sent after DTAS (but
reversal) and before first ring. Waits for ACK from CPE after DTAS for CIDCW.
•
ETSI FSK With PR (UK)—CID, CIDCW, and VMWI. FSK is sent after polarity
reversal and DTAS and before first ring. Waits for ACK from CPE after DTAS for
CIDCW. Polarity reversal is applied only if equipment is on hook.
The default is Bellcore(N.Amer, China).
The 900 Series phone supports bell 202 and v.23 standards for caller ID generation.
Select the FSK standard you want to use, bell 202 or v.23.
The default is bell 202.
Select the method you want to use, Default or Sweden default. (Not in PAP2T)
The default is Default.
Chapter 5 SPA900 Series Phone Field Reference
no
polarity reversal or DTAS).
no
polarity reversal) and
no
no
DTAS) and
no
polarity reversal
no
polarity
Document Version 3.0