Supplementary Services - Linksys SPA921-NA Administrator's Manual

Chapter 5 SPA900 Series Phone Field Reference
Field
Remote Ringing LED
Local Active LED
Remote Active LED
Local Held LED
Remote Held LED
Disabled LED
Register Failed LED
Registering LED
Call Back Active LED

Supplementary Services

Enable or disable the corresponding supplementary services on the phone. The default value
for these parameters is yes.
Field
Conference Serv
Attn Transfer Serv
Blind Transfer Serv
DND (Do Not Disturb) Serv
Block ANC (Anonymous
Call) Serv
Call Back Serv
Document Version 3.0
Description
LED pattern during the Remote Ringing state, where the shared call appearance
is in ringing on another station. Not applicable if the call appearance is not shared.
Leaving this entry blank indicates the default value of c=r;p=d.
LED pattern during the Local Active state, where the call appearance is engaged
in an active call. Leaving this entry blank indicates the default value of c=r.
LED pattern during the Remote Active state, where another station is engaged in
an active call on this shared call appearance. Not applicable is this call appearance
is not shared. Leaving this entry blank indicates the default value of c=r;p=d.
LED pattern during the Local Held state, where the call appearance is held by this
station. Leaving this entry blank indicates the default value of c=r;p=s.
LED pattern during the Remote Held state, where another station has placed this
call appearance on hold. Not applicable if the call appearance is not shared.
Leaving this entry blank indicates the default value of c=4,p=s.
LED pattern when the Call Appearance is disabled (not available for any
incoming or outgoing call). Leaving this entry blank indicates the default value
of c=o.
LED pattern when the corresponding extension has failed to register with the
proxy server. Leaving this entry blank indicates the default value of c=a.
LED Pattern when the corresponding extension is trying to register with the proxy
server. Leaving this entry blank indicates the default value of c=r;p=s.
Call Back operation is currently active on this call appearance is not shared.
Leaving this entry blank indicates the default value of c=r;p=s.
Description
Enable/disable Three way conference service
Enable/disable attended-call-transfer service
Enable/disable blind-call-transfer service
Enable/disable do-not-disturb service
Enable/disable block-anonymous-call service
Enable/disable call-back (a.k.a. repeating dialing) service
Linksys 900 Series IP Phone Administrator Guide
Phone Tab
5-35