Linksys SPA921-NA Administrator's Manual page 46

Using the Interactive Voice Response Interface
Table 2-2 IVR Options (continued)
Check Network Mask
Set Network Mask
Check Static Gateway
IP Address
Set Static Gateway IP
Address
Check MAC Address
Check Firmware
Version
Check Primary DNS
Server Setting
Set Primary DNS
Server
Check administration
web server port
Check LAN IP Address 210
Check PBX multicast
address
Set PBX multicast
address
Enable/Disable
administration web
server
Manual Reboot of Unit 732668
Linksys 900 Series IP Phone Administrator Guide
2-18
120 None
121 Enter value using numbers
on the telephone key pad.
Use the * (star) key when
entering a decimal point.
130 None
131 Enter IP address using
numbers on the telephone
key pad. Use the * (star)
key when entering a
decimal point.
140 None
150 None
160 None
161 Enter IP address using
numbers on the telephone
key pad. Use the * (star)
key when entering a
decimal point.
170 None
None
180 None
181 Enter IP address and port.
Use * key for entering a
dot. For example,
224.168.168.169:8089 is
224*168*168*169*8089.
7932 Enter 1 to enable
Enter 0 to disable
None
Chapter 2
IVR announces the current network
mask of SPA.
DHCP must be "Disabled," otherwise
you hear, "Invalid Option," if you try
to set this value.
Requires password
IVR announces the current gateway
IP address of SPA.
DHCP must be "Disabled," otherwise
you hear, "Invalid Option," if you try
to set this value.
Requires password
IVR announces the MAC address of
SPA in hex string format.
IVR announces the version of the
firmware running on the SPA.
IVR announces the current setting in
the <Primary DNS> parameter.
Requires password
IVR announces the port that the web
server is listening on. (Default is 80)
IVR announces the current IP address
of the LAN port.
IVR announces the current value.
Enter a * between the IP address and
the Port fields. Requires password
Requires password
After you hear "Option Successful,"
hang up. Unit reboots automatically.
Document Version 3.0
Getting Started