Language Selection - Linksys SPA921-NA Administrator's Manual

Chapter 5 SPA900 Series Phone Field Reference
Inband DTMF Boost
Dictionary Server Script

Language Selection

Document Version 3.0
Controls the amount of amplification applied DTMF signals.
Choices are 3dB, 6dB, 9dB, 12dB, 15dB, or 18dB.
The default is 12dB.
Defines the location of the dictionary server, the languages available and the
associated dictionary. The syntax is as follows:
<Dictionary_Server_Script ua="na">
</Dictionary_Server_Script>
The default is blank and the maximum number of characters is 512. The detailed
format is as follows:
serv={server ip port and root path};
d0=<language0>;x0=<dictionary0 filename>;
d1=<language1>;x1=<dictionary1 filename>;
d2=<language2>;x2=<dictionary2 filename>;
d3=<language3>;x3=<dictionary3 filename>;
d4=<language4>;x4=<dictionary4 filename>;
d5=<language5>;x5=<dictionary5 filename>;
d6=<language6>;x6=<dictionary6 filename>;
d7=<language3>;x7=<dictionary7 filename>;
d8=<language8>;x8=<dictionary8 filename>;
d9=<language5>;x9=<dictionary9 filename>;
The following is an example value:
<Dictionary_Server_Script ua="na">
serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.
xml </Dictionary_Server_Script>
Specifies the default language. The value needs to match one of the languages
supported by the dictionary server. The script (dx value) is as follows:
<Language_Selection ua="na">
</Language_Selection>
The default is blank and the maximum number of characters is 512. The following
is an example:
<Language_Selection ua="na"> Spanish
</Language_Selection>
Linksys 900 Series IP Phone Administrator Guide
Regional Tab
5-31