Linksys SPA921-NA Administrator's Manual page 122

Regional Tab
Accept Last Act Code
Accept Last Deact Code
CW Act Code
CW Deact Code
CW Per Call Act Code
CW Per Call Deact Code
Block CID Act Code
Block CID Deact Code
Block CID Per Call Act Code
Block CID Per Call Deact
Code
Block ANC Act Code
Block ANC Deact Code
DND Act Code
DND Deact Code
CID Act Code
Linksys 900 Series IP Phone Administrator Guide
5-24
Accepts the last outbound call. It lets the call ring through when do not disturb or
call forwarding of all calls are enabled.
The default is *64.
Cancels the code to accept the last outbound call.
The default is *84.
Enables call waiting on all calls.
The default is *56.
Disables call waiting on all calls.
The default is *57.
Enables call waiting for the next call.
The default is *71.
Disables call waiting for the next call.
The default is *70.
Blocks caller ID on all outbound calls.
The default is *67.
Removes caller ID blocking on all outbound calls.
The default is *68.
Blocks caller ID on the next outbound call.
The default is *81.
Removes caller ID blocking on the next inbound call.
The default is *82.
Blocks all anonymous calls.
The default is *77.
Removes blocking of all anonymous calls.
The default is *87.
Enables the do not disturb feature.
The default is *78.
Disables the do not disturb feature.
The default is *79.
Enables caller ID generation.
The default is *65.
Chapter 5 SPA900 Series Phone Field Reference
Document Version 3.0