Ring Tone - Linksys SPA921-NA Administrator's Manual

Phone Tab
Field
Block CID (Caller ID) Serv
Secure Call Serv
CFWD All Serv
CFWD Busy Serv
CFWD On No Answer Serv
Paging Serv
Call Park Serv
Call Pick Up Serv
ACD Login Serv
Group Call Pick Up Serv
ACD Ext

Ring Tone

Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID
can be used in a DirEntry to indicate which ring tone to use when the corresponding caller calls.
Field
Ring 1
Ring 2
Ring 3
Ring 4
Ring 5
Ring 6
Ring 7
Ring 8
Ring 9
Ring 10
Linksys 900 Series IP Phone Administrator Guide
5-36
Description
Enable/disable blocking outbound Caller-ID service
Enable/disable secure-call service
Enable/disable call-forward-all service
Enable/disable call-forward-on-busy service
Enable/disable call-forward-on-no-answer service
Enable/disable the paging service
Enable/disable the call park service
Enable/disable the call pickup service
Enable/disable the ACD Login Service, used for call centers. Typically enabled
with the <SIP-B> parameter.
Enable/disable the group call pickup service
The extension used for handling ACD calls.
Default 1 or 2
Description
Ring tone script for Ring 1. The default is n=Classic-1;w=3;c=1.
Ring tone script for Ring 2. The default is n=Classic-2;w=3;c=2.
Ring tone script for Ring 3. The default is n=Classic-3;w=3;c=3.
Ring tone script for Ring 4. The default isn=Classic-4;w=3;c=4.
Ring tone script for Ring 5. The default isn=Simple-1;w=2;c=1.
Ring tone script for Ring 6. The default isn=Simple-2;w=2;c=2.
Ring tone script for Ring 7. The default isn=Simple-3;w=2;c=3.
Ring tone script for Ring 8. The default isn=Simple-4;w=2;c=4.
Ring tone script for Ring 9. The default isn=Simple-5;w=2;c=5.
Ring tone script for Ring 10. The default isn=THx;w=4;c=7.
Chapter 5 SPA900 Series Phone Field Reference
Document Version 3.0