Line Key Leds - Linksys SPA921-NA Administrator's Manual

Line Key LEDs

•
•
•
•
A Call State is the Call Appearance State applied to a specific call instance. Call States are
divided into two general categories:
•
•
Line Key LEDs
This section summarizes the behavior of the line key LEDS on SPA900 Series phones with
multiple line key status indicators
A line key corresponds to a call appearance. Call appearances for the same extension are
numbered in ascending order of their line key position starting at 1. The line key LED color
and blinking pattern are fully programmable.
The line key LED can be in one of four conditions:
•
•
•
•
The 900 Series phone has four built- in blinking patterns defined:
•
•
•
•
The administrator can also define arbitrary blinking pattern by modifying the syntax of an
LedScript. The administrator can specify a different color and pattern for each of the following
states of the call appearance.
•
•
•
•
•
•
•
Linksys 900 Series IP Phone Administrator Guide
3-10
Connected: Connected with remote party
Held: Remote party is on hold
Invalid: Remote party hangs up or error while attempting outbound call
Busy: the line is being used by another station (shared line only)
Active (Call) State: If the state is Dialing, Calling, Proceeding, Connected, or Invalid. When the
state of the Call is Active, it is referred to as an Active Call
Standby (Call) State: the state is Ringing or Holding. When the state of the Call is Standby, it is
referred to as a Standby Call
Red (r)
Green (g)
Amber (a)
Off (o).
No Blink (nb): Steady on (or off)
Slow Blink (sb): 500ms on, 500ms off
Fast Blink (fb): 100ms on, 100ms off
Double Blink (db): 100ms on, 100ms off, 100ms on, 700ms off
Idle: This call appearance is not in use. The user can use it to make outbound call on this station
Local Seized: This call appearance has been seized by this station to prepare for an outbound call
Local Progressing: This station is making an outbound call that is progressing
Local Active: This station is engaged in a connected call on this call appearance
Local Ringing: This station is ringing for an incoming call on this call appearance
Local Held: This station has placed this call appearance on hold
Remote Seized: This call appearance has been seized by another station to prepare for an outbound
call
Chapter 3 Managing Linksys 900 Series IP Phones
Document Version 3.0