Adjusting The External Component Input Level; External Components - Kenwood R-K711 Instruction Manual

Connecting Other Accessories (Commercially Available Units) R P.12
Related
Audio Settings R P.47 onwards
Information

Adjusting the External Component Input Level

Use the procedure below to adjust the input level for the external
component connected to the [PHONO IN], [TAPE PLAY IN] or [AUX IN]
terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
1 1
Press the [INPUT SELECTOR] key to adjust the input
level.
You can set the input level for each of PHONO, TAPE and AUX.
2 2
Press the [MODE] key.
3 3
Select "INPUT LEVEL".
Press the [G] or [H] key.
Press the [ENTER] key.
4 4
Set the input level.
Press the [G] or [H] key.
Press the [ENTER] key.
If you adjust the input level for PHONO or AUX, the output level from the
[TAPE REC OUT] terminal will also change.

External Components

You can adjust the input level in a
range from –3 to +5.
43
English