How To Use This Manual - Kenwood R-K711 Instruction Manual

How to Use This Manual

Operation procedure
While this system can be controlled
from either the remote control or
the main unit, the explanations
in this manual primarily describe
operation procedures using the
remote control.
Display shown during
or after an operation
The displays shown in this instruction
manual may diff er from the actual
displays.
Remote control keys
used in the procedure
18
R-K711
CD
Playing a CD. As well as normal playback, you can use folder playback, program playback, random
playback and repeat playback.
Playing a CD
CD tray
Load and play a CD.
If you have already loaded a disc, just press the [CDE] key to turn the system on and
begin playback.
1
Press the [L] key on the main unit to open the CD tray and
then load the CD.
2
Press the [L] key on the main unit to close the CD tray.
The "READING" message flashes while the unit is reading the information on the
CD.
3
Press the [CDE] key.
A CD is loaded in
the tray.
26
R-K711
The system displays text information
such as track names and album names
for CD-TEXT discs.
Track number Elapsed time of the
during playback
track being played
When you play the following types of disc, track numbers may not be displayed
correctly.
– Discs recorded in Mix mode*
– Discs recorded in multiple sessions
– Discs recorded in mixed formats of CD-DA format and formats that are not
music data
* Mix mode is a mode in which the CD-DA format is combined with audio file such as MP3,
WMA and AAC.
Load the disc that the labeled side
faces upwards and the disc sits
snugly in the tray.