Adjusting The External Component Input Level; External Components - Kenwood K-821DV Instruction Manual

Connecting Other Accessories (Commercially Available Units) R P.14
Related Related
Audio Settings R P.69 onwards
Information Information

Adjusting the External Component Input Level

Use the procedure below to adjust the input level for the external
component connected to the [AUX IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same vol-
ume setting.
1 1
Press the [AUX] key.
2 2
Press the [MODE] key.
3 3
Select "INPUT LEVEL".
Press the [C] or [D] key.
Press the [ENTER] key.
4 4
Adjust the Input Level.
Press the [A] or [B] key.
Press the [ENTER] key.
If you adjust the input level for AUX, the output level from the [AUX REC
OUT] terminal will also change.

External Components

You can adjust the input
level in a range from -3 to 5.
English
65