Handling Discs - Kenwood R-K711 Instruction Manual

Important Information

Handling Discs

Handling precautions
Hold a CD taking care not to touch the played surface.
Discs playable on the system
This system can play back a CD (12 cm, 8 cm), CD-ROM, CD-
R, CD-RW or the audio part of a CD-EXTRA disc.
Notes on CD-ROM/CD-R/CD-RW discs
If the CD-ROM, CD-R or CD-RW disc in use has a printable
label surface, the disc may be unable to be taken out of
the system due to sticking of the label surface. To prevent
malfunction of the system, do not use such a disc.
Notes on transporting or moving the system
Before transporting or moving this system, take the following actions:
1 Remove any CDs from the unit.
2 Press the [CDE] key and check that the "CD NO DISC" message is displayed.
3 Wait a few seconds and then turn the system off .
4 If there are any other components connected to the system, check that they are all turned off before disconnecting the
cables.
24
R-K711
Cautions on CD discs
Always use a disc carrying the
A disc without this marking may be unable to be played
back correctly.
The disc rotates at a high speed during playback. Never
use a cracked, chipped or greatly warped disc. Otherwise,
damage or malfunction of the player may result.
Also, do not use a disc with a non-circular shape as this may
result in malfunction.
marking.