Cd Program Playback Mode - Kenwood R-K711 Instruction Manual

CD
32 32
R-K711 R-K711

CD Program Playback Mode

This mode lets you selectively play your favorite tracks on a CD (up to 32
tracks).
Press the [CDE] key to switch the input source to CD.
Playback begins when you switch the input source, so press the [F] key to stop
playback.
If you are already playing the CD, press the [F] key to stop playback.
1 1
CD
Press the [P.MODE] key to select program playback mode.
The mode changes as shown below each time you press the key.
PGM
Program
playback mode
MP3/WMA/AAC
1 Press the [P.MODE] key to select program playback
mode.
The mode changes as shown below each time you press the key.
N lit
Folder
playback mode
2 Select the folder to be used for program playback.
Selection with number keys
To select folder number 17, press the [+10]
key and then the [7] key.
For folder number 30, press the [+10] key
three times and then press the [0] key.
For folder number 105, press the [+100] key
and then the [5] key.
Selection with the [G] or [H] key
When folder number 158 is selected.
If you enter the wrong information, press the [CLEAR] key before pressing
the [ENTER] key and then enter the information again.
Press the [ENTER] key within 20 seconds after selecting a folder.
PGM
lit unlit
Cancel program
playback mode
PGM
lit
Program
playback mode
Press the [ENTER] key.
PGM
unlit
Cancel program
playback mode
Press the [ENTER] key.