Kenwood R-K711 Instruction Manual page 55

Related
Information
P.XX
P.XX -
7 7
Press the [TONE/
TURN OVER] key.
8 8
Press the [SOUND PRESET] key to select the
frequency of the high tones (TREBLE) you want to
adjust (Low: 5 kHz; Mid: 7 kHz; High: 10 kHz).
Only available on the remote control.
9 9
Adjust the high tones
(TREBLE) level by
pressing the [SOUND
CONTROL] key.
10 10
Press the [ENTER] key.
If you set a level other than 0, the [TONE] indicator lights.
If you do not need to adjust all the range levels, press the [ENTER] key
to end the settings after you have fi nished the range level adjustments
you want to make.
Digital Sound Equalizer Digital Sound Equalizer
Select "TREBLE" by
pressing the [SOUND
SELECTOR] key.
Adjust the high
tones (TREBLE)
level by turning the
[SOUND CONTROL]
knob.
The [TONE] indicator fl ashes while
setting is in progress. While the
[TONE] indicator is fl ashing, you
can adjust the level through a
range from –6 to +6.
55
English