Adjusting The External Signal Input Level - Kenwood K-501USB Instruction Manual

Adjusting the External Signal Input Level

If the audio of the auxiliary component
is louder or lower than other audio
sources while the system is set to the
same volume level, adjust the signal
input level.
50
English
1
Select the audio source to be
adjusted (AUX or D.AUDIO).
AUX D.AUDIO
2
Press the TOOL key to select [INPUT
LEVEL] and enter the selection.
3
Adjust the input level.
Adjust in the range between –3 and +3.
* The input level adjustment is applied only to
the audio source selected in step 1.
4
Enter the selection.
Adjusting the input level also changes the recording
level of the audio signal input from the AUX or D.AUDIO
Hint
IN connector.
The operations including the selection and entry can
also be performed on the main unit.
or
Each press switches the
selection.
* Selecting [EXIT] returns to
the previous display.