Changing The Setups Of The System; Adjusting The Input Level "Input Level; Adjusting The Left/Right Audio Balance "Balance - Kenwood CORE-A55 Instruction Manual

Changing the setups of the system

Adjusting the input level
"Input Level"
The level of the signal input can be adjusted when
the D.AUDIO, AUX or PORTABLE audio source is
selected. Adjust the input level if the audio level of
the connected component is lower or higher than
the level at the same volume control position of
other audio sources.
1
Select the audio source to be
adjusted and play it.
Rotate [INPUT SELECTOR].
Press [INPUT SELECTORA/B].
2
Enter the setup mode.
Press [MODE].
3
Select "Input Level".
Use [MULTI CONTROL< / >] to select,
then press [ENTER].
4
Adjust the level.
Use [MULTI CONTROL< / >] to adjust, then
press [ENTER].
Input Level
Input Level
Input Level
The setup mode is exited automatically when the
selection is entered.
28
CORE-A55/KAF-A55
+3
Increases the level.
0
Decreases the level.
−3
Adjusting the left/right audio balance
"Balance"
Adjust the balance between the left and right
speaker levels.
Disconnect the headphones before adjustment.
1
Enter the setup mode.
Press [MODE].
2
Select "Balance".
Use [MULTI CONTROL< / >] to select, then
press [ENTER].
3
Adjust the balance.
Use [MULTI CONTROL< / >] to adjust, then
press [ENTER].
L
ll ll ll T ll ll ll
L
ll ll ll T ll ll ll
The setup mode is exited automatically when the
selection is entered.
■
To abort setup in the middle:
Press [MODE].
Indicates the left/right
balance.
R
R