Dell PowerEdge M420 Reference Manual page 1569

Parameter
Admin State
Power State
Configured Card Model Identifier
Pluggable
If you supply a value for slot/port, the following additional information
appears as shown in the table below.
Parameter
Inserted Card Model Identifier
Inserted Card Description
Configured Card Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC
User Guidelines
The command has no user guidelines.
Description
The slot administrative mode is enabled
or disabled.
The slot power mode is enabled or
disabled.
The model identifier of the card
preconfigured in the slot. Model identifier
is a 32-character field used to identify a
card.
Cards are pluggable or non-pluggable in
the slot.
Description
The model identifier of the card inserted
in the slot. Model identifier is a 32-
character field used to identify a card.
This field is displayed only if the slot is
full.
The card description. This field is
displayed only if the slot is full.
The description of the card preconfigured
in the slot.
System Management Commands
1565