Dell PowerEdge M420 Reference Manual page 1498

Parameter Description
Parameter
host-addr
community-string
traps
version 1
version 2
informs
seconds
retries
port
filtername
Default Configuration
The default configuration is 3 retries, and 15 seconds timeout. This
command is disabled by default. No notifications are sent.
If you enter this command with no keywords, the default is to send all trap
types to the host. No informs are sent to this host. If no version keyword is
present, the default is Version 1.
Command Mode
Global Configuration mode
1494
SNMP Commands
Description
Specifies the IP address of the host (targeted recipient) or the
name of the host. (Range:1-158 characters)
Specifies a password-like community string sent with the
notification operation. (Range: 1-20 characters)
Indicates that SNMP traps are sent to this host.
Indicates that SNMPv1 traps will be used.
Indicates that SNMPv2 traps will be used.
Indicates that SNMPv2 informs are sent to this host.
Number of seconds to wait for an acknowledgment before
resending informs. The default is 15 seconds. (Range: 1-300
characters.)
Maximum number of times to resend an inform request. The
default is 3 attempts. (Range: 0-255 characters.)
UDP port of the host to use. The default is 162. (Range: 1-
65535 characters.)
A string that is the name of the filter that defines the filter for
this host. If unspecified, does not filter anything (Range: 1-30
characters.)