Dell PowerEdge M420 Reference Manual page 1080

Parameter
hello-interval
seconds
dead-interval
seconds
retransmit-interval
seconds
transmit-delay
seconds
md5
key
key-id
Default Configuration
Parameter
area-id
router-id
hello-interval
seconds
retransmit-interval
seconds
transmit-delay
seconds
dead-interval
seconds
authentication-key
key
message-digest-key
key-id md5 key
1080
OSPF Commands
Description
Number of seconds to wait before sending hello packets to the
OSPF virtual interface. (Range: 1–65535)
Number of seconds to wait before the OSPF virtual interface on
the virtual interface is assumed to be dead. (Range: 1–65535)
The number of seconds to wait between retransmitting LSAs if
no acknowledgement is received. (Range: 0–3600)
Number of seconds to increment the age of the LSA before
sending, based on the estimated time it takes to transmit from
the interface. (Range: 0–3600)
Use MD5 Encryption for an OSPF Virtual Link.
Authentication key for the specified interface. (Range: 8 bytes
or less if the authentication type is simple and 16 bytes or less if
the type is encrypt.)
Authentication key identifier for the authentication type
encrypt. (Range: 0–255)
Default
No area ID is predefined.
No router ID is predefined.
10 seconds
5 seconds
1 second
40 seconds
No key is predefined.
No key is predefined.