Dell PowerEdge M420 Reference Manual page 1579

Parameter
Status
Time Since Last
Copy
Time Until Next
Copy
(nsf-stack) #show nsf
Administrative Status..........................
Enable
Operational Status.............................
Enable
Last Startup Reason............................ Warm
Auto-Restart
Time Since Last Restart........................ 0
days 16 hrs 52 mins 55 secs
Restart In Progress............................ No
Warm Restart Ready............................. Yes
Copy of Running Configuration to Backup Unit:
Status...................................... Stale
Time Since Last Copy........................ 0 days
4 hrs 53 mins 22 secs
Description
Whether the running configuration
on the backup unit includes all
changes made on the management
unit.
When the running configuration
was last copied from the
management unit to the backup
unit.
The number of seconds until the
running configuration will be copied
to the backup unit. This line only
appears when the running
configuration on the backup unit is
Stale.
Range
Current or Stale
Time Stamp
0 -
L7_UNITMGR_
CONFIG_COPY
_HOLDDOWN
System Management Commands
Default
1575