Dell PowerEdge M420 Reference Manual page 1580

Time Until Next Copy........................ 28
seconds
Unit
----
1
2
3
Per Unit Status Parameters are explained as follows:
Parameter
NSF Support
Example – Switch Firmware Stack Status
The following example displays the Switch Firmware stack status information
for the switch.
console#show switch
Management
SW Switch
--- ---------- --------- ------------- ------------- ------------- ---------
1 Mgmt Sw
2 Stack Mbr
console#show switch 1
Switch............................ 1
Management Status................. Management Switch
Hardware Management Preference.... Unassigned
Admin Management Preference....... Unassigned
Switch Type....................... 0xb6340001
Preconfigured Model Identifier.... PCT7048
Plugged-in Model Identifier....... PCT7048
1576
System Management Commands
NSF Support
-----------
Yes
Yes
Yes
Description
Whether a unit
supports NSF
Standby Preconfig
Status Model ID
ANFirebolt-48 ANFirebolt-48 OK
ANFirebolt-24 ANFirebolt-24 Updating Code 13.4.8.42
Range
Yes or No
Plugged-in Switch
Model ID Status
Default
—
Code
Version
4.12.17.37