Dell PowerEdge M420 Reference Manual page 1478

Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP communications status.
Console # show snmp
Community-String Community-Access View name
---------------- ---------------- ----------
public
private
private
Community-String Group name
---------------- ---------
public
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address
-------------- ------
1474
SNMP Commands
read only
read write
su
IP address
----------
user-group All
Type Community
--------- -------
IP address
----------
user-view
Default
DefaultSuper 172.17.1.1
Version UDP
Port name
---- ------ --- -----
All
172.16.1.1
Filter TO Retries
Sec