Ethernet Configuration - Dell PowerEdge M420 Reference Manual

Command
show logging email
statistics
clear logging email statistics Clears the email alerting statistics.
security
mail-server ip-
address|hostname
port (Mail Server
Configuration Mode)
username (Mail Server
Configuration Mode)
password (Mail Server
Configuration Mode)
show mail-server
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

Ethernet Configuration

Command
clear counters
description
duplex
flowcontrol
interface
88
Command Groups
Description
Displays information on how many emails are
sent, how many emails failed, when the last
email was sent, how long it has been since the
last email was sent, how long it has been since
the email changed to disabled mode.
Sets the email alerting security protocol.
Configures the SMTP server IP address and
changes the mode to Mail Server Configuration
Mode.
Configures the TCP port to use for
communication with the SMTP servers.
Configures the username required by the
authentication.
Configures the password required to
authenticate to the email server.
Displays the configuration of all the mail servers
or a particular mail server.
Description
Clears statistics on an interface.
Adds a description to an interface.
Configures the full/half duplex operation of a
given Ethernet interface when not using auto-
negotiation.
Configures the flow control on a given interface. GC
Enters the interface configuration mode to
configure parameters for an interface.
a
Mode
PE
GC
MSC
GC
MSC
MSC
MSC
PE
a
Mode
PE
IC
IC
GC or
IC