Dell PowerEdge M420 Reference Manual page 1572

User Guidelines
The switch SID is used when pre-configuring switches in a stack using the
member command in config-stack mode.
Example
The following example displays the information for supported switch types.
console>show supported switchtype
SID
----------------------------------------------------------
1
The following table describes the fields in the example.
Field
Switch Index (SID)
Model Identifier
Management Preference
Code Version
The following example displays the format of the show supported switchtype
switchindex
[ ] command.
console#show supported switchtype 1
Switch Type....................... 0x73950001
Model Identifier.................. PCM8024
Switch Description................ PowerConnect M8024
Management Preference............. 1
1568
System Management Commands
Switch Model ID
PCM8024
Description
This field displays the index into the database of
supported switch types. This index is used when
preconfiguring a member to be added to the
stack.
This field displays the model identifier for the
supported switch type.
This field indicates the management preference
value of the switch type.
This field displays the code load target identifier
of the switch type.
Mgmt Code
Pref Type
0x100b000