Dell PowerEdge M420 Reference Manual page 1576

Unit
Management Status
Admin Management Preference
Switch Type
Model Identifier
Switch Status
Switch Description
Expected Code Version
Detected Code Version
Detected Code in Flash
Boot Code Version
Up Time
Example – All Units in the Stack
This example displays information about all units in the stack.
1572
System Management Commands
Description
This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
This field indicates the administrative
management preference value assigned to the
switch. This preference value indicates how
likely the switch is to be chosen as the
Management Switch.
This field displays the 32-bit numeric switch
type.
This field displays the model identifier for this
switch. Model Identifier is a 32-character field
assigned by the switch manufacturer to identify
the switch.
This field displays the switch status. Possible
values are OK, Unsupported, Code Mismatch,
Config Mismatch, or Not Present.
This field displays the switch description.
This field indicates the expected code version.
This field displays the version of code running
on this switch. If the switch is not present and
the data is from preconfiguration, the code
version is "None."
This field displays the version of code that is
currently stored in FLASH memory on the
switch. This code will execute after the switch is
reset. If the switch is not present and the data is
from pre-configuration, then the code version is
"None."
This field displays the version of the boot
strapping code.
This field displays the system up time.