Dell PowerEdge M420 Reference Manual page 1608

Parameter Description
Parameter
days-of-the-week
time
Default Configuration
This command has no default configuration.
Command Mode
Time Range Configuration
User Guidelines
Multiple periodic entries can exist in a time range, but periodic time entries
cannot overlap each other. Periodic time entries can also coexist with an
absolute time entry in a time range.
1604
Time Ranges Commands
Description
The first occurrence of this argument is the starting day or days
from which the configuration that referenced the time range
starts going into effect. The second occurrence is the ending
day or days from which the configuration that referenced the
time range is no longer in effect. If the end days-of-the-week are
the same as the start, they can be omitted.
This argument can be any single day or combinations of days:
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday,
Sunday.
Other possible values are:
• daily -- Monday through Sunday
• weekdays -- Monday through Friday
• weekend -- Saturday and Sunday
If the ending days of the week are the same as the starting days
of the week, they can be omitted.
The first occurrence of this argument is the starting
hours:minutes which the configuration that referenced the
time range starts going into effect. The second occurrence is
the ending hours:minutes at which the configuration that
referenced the time range is no longer in effect.
The hours:minutes are expressed in a 24-hour clock. For
example, 8:00 is 8:00 am and 20:00 is 8:00 pm.