Tacacs-Server Host - Dell PowerEdge M420 Reference Manual

IP address
---------------
10.254.24.162

tacacs-server host

Use the tacacs-server host command in Global Configuration mode to
configure a TACACS+ server. This command enters into the TACACS+
configuration mode. To delete the specified hostname or IP address, use the
no form of this command.
Syntax
tacacs-server host {
no tacacs-server host {
ip-address —
•
hostname — The hostname of the TACACS+ server. (Range: 1-255
•
characters).
Default Configuration
No TACACS+ host is specified.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple tacacs-server host commands can be used.
TACACS servers are keyed by the host name, therefore it is advisable to use
unique host names.
Example
The following example specifies a TACACS+ host.
Port
-----
49
ip-address hostname
|
ip-address hostname
|
The IP address of the TACACS+ server.
Timeout Priority
------- --------
Global 0
}
}
TACACS+ Commands
713