Ipv6 Nd Prefix - Dell PowerEdge M420 Reference Manual

Syntax
ipv6 nd other-config-flag
no ipv6 nd other-config-flag
Default Configuration
False is the default configuration.
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets to true the "other stateful configuration" flag in
router advertisements
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd other-config-flag

ipv6 nd prefix

Use the ipv6 nd prefix command to configure parameters associated with
prefixes that the router advertises in its router advertisements.
Syntax
ipv6-prefix/prefix-length
ipv6 nd prefix
{preferred-lifetime | infinite}] [no-autoconfig] [off-link]
no ipv6 nd prefix
Syntax Description
Parameter
ipv6-prefix
prefix-length
ipv6-prefix/prefix-length
Description
IPv6 prefix.
IPv6 prefix length.
[{valid-lifetime | infinite}
IPv6 Routing Commands
975